You're going need an S2 bracket at least. If your bike is naked that's all you'll need but it's helpful to have an FZ6N headlight harness otherwise you'll have a lot of extra wiring. When you convert you'll need to rewire the plug that goes into the S2 cluster. Just match the wiring diagram...
Sold my FZ6 so I stripped out most of my aftermarket parts.
The unit was strapped in with the toolkit so that's why the housing was cracked but is in 100% working order. I repaired it with some JB Plastic weld. The interior is totally water sealed from the factory and the bike was running great...
The bucket is Motodemic's low profile bucket and the light is a generic Jeep Wrangler Aftermarket LED. I was originally looking for a JW Speaker light but didn't find any in my price range. Still on the lookout though!
Here's the bike as it currently sits. Mod list going front to back: LED Headlight and turn signals, R6 forks and calipers, S2 Speedo, Pro Taper Street Low Bars, Ballistic LiFe Battery, R6 Master Cylinder, R6 headers, 4° Ignition Advance Trigger Wheel, Power Commander, Competition Werks Slip On...
Sorry, I'm not super active on this forum. I ended up with an S2 speedo. Bought an FZ6R wiring harness and then rearranged the pins in the plug to the speedo. Got a speedo bracket from one of the users on here.
The bike has evolved quite a bit from when I first posted this. Plan on posting a...
Hey all
Im sure everyone here has a passion for motorcycles - we're on a bike forum for gods sakes! I do all my own work and living in Chicago, that isn't the easiest thing to do. I work out of a shop called Moto Guild, a DIY workshop with all the tools and equipment you need to work on your...
Looks like your inbox is full. I'd gladly take the tank! What would the shipping cost be to 60618? Send me an invoice at [email protected] via PayPal
Cheers
Paul
Hey all. I searched the forum looking for a post about this but couldn't find anything.
In the interest of full disclosure I got the idea from this site - https://stoltecmoto.com/fz-09-braking-and-control-updates/
Parts list:
- R6 Master cylinder and reservoir
- R6 brake lever (FZ6 lever...
A word of caution to anyone doing this swap - the FZ6R harness will not work without some modification. I was hoping I'd be able to use the FZ6R harness for a clean straightforward install but ended up with some funny and unexpected results. Link to video below
https://youtu.be/pj7gzzHoUJs
I was having issues with my Fizzer a couple years back a few months after installing a PCV. Same symptoms as you with a Leo Vince exhaust, BMC High Flow Air Filter, and the fuel controller; bike was stock otherwise. Turns out I was turning the bike on wrong. With my power commander I have to...