Lights

bfgb

New Member
Joined
Oct 2, 2016
Messages
9
Reaction score
4
Points
3
Location
angmaering u.k.
Visit site
lights, more specifically side lights. I had one stop working, so I removed the bulb and it had blown. No drama's there just stick a new one in. Best to replace as a pair I thought. When I put the new bulbs in, nothing. Is there a fuse for side lights. Any other ideas?
 

trepetti

It's all good!
Elite Member
Site Supporter
Joined
Mar 23, 2012
Messages
1,603
Reaction score
841
Points
113
Location
Northern New Joizey
Visit site
These are the fuses on the bike.....

1597070757036.png

But are you SURE it's a fuse? Reading above it sounds like you had 1 lamp out, you replaced the pair and now both lamps are out. If there is a blown fuse, it is not the root cause. Since the fuses each protect both left and right for whichever circuit, the original problem was not a fuse problem. So if there is a fuse blown now that both lamps are new, something else is wrong.....
 

TownsendsFJR1300

2007 FZ6
Site Supporter
Joined
Feb 7, 2009
Messages
12,531
Reaction score
1,176
Points
113
Location
Cape Coral, Florida, USA
Visit site
If their the stock FRONT directionals, they do have two contacts (at the base) and only go in one way.

If forced in-correctly, they won't work.

The rear bulbs (directional only) are single contact.

Might want to clarify what bulbs(fronts, or both right side, etc) and check the bulb/install...
 
Top