KUMAJ
Member
Could be some one already know that you can install early R6 or FZ1(FZS1000) preload adjuster into FZ6 front fork. However, It will be cost $150. Today, I noticed you can use preload adjuster of later TDM850 into FZ6. It's cost just $80. Of cource, you need cut and adjust the spacer for normal height. Parts# is below
4TX-2311H-00 .FORK, BOLT
93210-34504 .O-RING
4TX-2311G-00 .BOLT, SPRINGADJUST
4TX-2331L-00 .SEAT, SPRING UPPER
93210-18N01 .O-RING
4TX-2311H-00 .FORK, BOLT
93210-34504 .O-RING
4TX-2311G-00 .BOLT, SPRINGADJUST
4TX-2331L-00 .SEAT, SPRING UPPER
93210-18N01 .O-RING