Search results

I'm glad to report, I have a solution. Steps / Notes: Since Ignition system turned out complete and working (via Ω checks), it had to be an electrical/wiring/coil issue. CPS was replugged for the n'th time. Checked all connections, from ECU to neutral switches, etc. & replugged starter cut-off...

Hi Gary Re: If the bike was working fine prior to your electrical work, and it won’t start after your work, then this is a problem you caused by inadvertently disconnecting a connector or by forgetting to reconnect something. Certainly, it was starting up. Something to note is I got a...

Checking starting circuit cut-off relay, (ref: Ignition System, 8-12, check 13): Continuity check: (+) B/R and (-) Sb provides ~684 reading (no beep) Continuity check: (+) B/R and (-) L/G provides ~704 reading (no beep) Reverse tests check out, no continuity as expected Colors reference B/R...

Great set of steps, results as follows (w/ CPS plugged in): Checked spark by removing entire spark plug unit, resting on engine block (on threads) and firing up starter. Spark plugs needs replacing soon. No spark though. B, B/W wires from ECU to Negative terminal have continuity. Checked...

Indeed. Some earlier testing, I noted while cranking, fuel was being sprayed in. Will be testing the spark plugs tomorrow and post update. In the sense of being proactive, assuming I don't have spark - what would be further diagnosing steps? According to the manual, I should check sparks...

I've avoided doing this as its a labour intensive process and would prefer to rule out other easier checked/diagnosable options. Though, I'll be checking these a bit later and posting an update as I'm running out of options. Note: Diagnostics don't report any issues relating to spark plugs nor...

Quite possibly a plug/wiring (wire connectivity) issue however I cant help but notice some sensors aren't being read which to me is a huge red flag. To me, the fact that crankshaft sensor (being a vitally important sensor) isn't detected when unplugged indicates its the ECU isn't getting to that...

I made 2 additions Running lights (left side, NOT high beam) Brake lights For running lights addition, I added 2 plug connectors (1 plug for running lights, 1 for spot light/LED additions). My own lights (built on main lighting system) has its own 10A. For brake lights addition, I once again...

Hi Motogiro Thanks for helpful tips, advice. I will keep in mind links, etc w/ source material in future. Thanks for info on Er_1 (and it seems Fault Code 22) w/ regards to low battery / power output. I was attempting to draw attention to sensors not being detected/missing like crankshaft...

Greetings I've recently finished with some electrical & cosmetic work on my bike (addition of lights) and fairing fixes, but when putting everything back together the bike won't start. Video ref: I went over key components and diag mode with some light multimeter usage. I can do more if...