Search results

  1. D

    2007 FZ6 ECU help

    The fuel pump he ordered was a Kemso I don't know what the oem was he already had the bad one out and the tank cleaned out good when I got there today but he did say the inside of the tank was a mess and the filter was about clogged up so I figure the injectors was just as bad I told him I would...
  2. D

    2007 FZ6 ECU help

    Good news but not where it needs to be........installed the new fuel pump today and it powered on like it should and after a few unsuccessful tries the engine fired up but the idling was really rough but it started. I just let the engine idle (rough Idle) and every time i even cracked the...
  3. D

    2007 FZ6 ECU help

    The daily update. Motogiro I found the 16 wire relay assembly no problem right where you said it would be and I checked the red wire with key on and yes 12 volts so I plugged the plug back in and seen the red wire mates up with red blue tracer wire so I run a continuity check from where it comes...
  4. D

    2007 FZ6 ECU help

    Wow that's a lot to try and process but luckily I have 40 years of trouble shooting mechanical/electrical machinery problems before retiring in Jan. of this year. Ok starter relay solenoid i take it as good it causes the starter to turn the engine over. There is no voltage at fuel pump with...
  5. D

    2007 FZ6 ECU help

    So this neutral safety switch, the clutch lever switch and kickstand switch is all wired in series si if one is not made the others don't see voltage? in turn causes no voltage to the fuel pump which causes no fuel to injections? At least I'm learning a thing or two.
  6. D

    2007 FZ6 ECU help

    No on the stolen or laid down part as far as I know the guy that the bike is registered to passed away a few years ago and its basically sit in storage since 2009 but it wasn't running when it was put in storage the bike was given to my friend as a gift. it's a 2007 with little over 7k miles...
  7. D

    2007 FZ6 ECU help

    Yes the engine spins over very good but never changes sound just spinning no crank. I've got the starter solenoid off and done a little research on which 2 post to apply 12v to make the relay cycle on and off and that seems to work ok hear it and see it click on and off but I connected my meter...
  8. D

    2007 FZ6 ECU help

    Those 30amp fuses both are good.
  9. D

    2007 FZ6 ECU help

    Still on the quest to bring the FZ6 back to life. Today I checked for 12v at the fuel and nothing so voltage is not to there so I guess it's on to the next possible cause.....I did pull the Starter Relay Solenoid is that the next thing to check? If so please enlighten me on how to check. Thank you
  10. D

    2007 FZ6 ECU help

    Thanks I'll check that 12v at the pump first chance I get.
  11. D

    2007 FZ6 ECU help

    Ok got a little bit of an update today first thing was listened for fuel pump to start up which results in silence no sound at all when powered on so then I located the fuse panel and the EFI 10amp fuse was blown so I replaced the fuse with another 10amp and tried to start bike which was...
  12. D

    2007 FZ6 ECU help

    Thanks for the reply I don't remember hearing the fuel pump start at all so I'll see if I can find the fuses and check that and go from there.
  13. D

    2007 FZ6 ECU help

    A friend of mine has a 2007 FZ6 that hasn't cranked in about 10 years and its a really nice bike very low miles and it just hasn't been fooled with really since the day it quit and I don't really know the history behind the day it quit. Ok we've decided to try and fix it and I've never really...
Top