xinoki
Junior Member
So i replaced my clutch on my 07 FZ6. now the clutch wont engage, it acts like its in neutral all the time regardless of the gear. ive adjusted the clutch cable. i replaced the clutch because while stopped and in first gear with the clutch pulled, the bike would go forward. i put the bike on the center stand, while it is in neutral the tire does not spin but when in first gear it spins (but does not increase the rate of spin when i give it some throttle). i last effort will be to take it to the bike shop but i want to try to see if i can fix it. any suggestions to check, could the pull rod be not placed properly, the plates not separating, spring too tight, anything would be helpful.