CBR1000RR muff meets FZ6

I got this muff for next to nothing,so I made it fit.Sounds OK, deep tone.
I know I need a new tire,and I gotta make some bodywork for the rear.
License bracket also.

whats your tail section off of?

It's FZ6, I made it.Has an integrated Ducati LED light in it with turns.
I made the seat cowl also

thats one thing I dig about streetfighters, all the custom work and ideas that go into them. :thumbup:

I knew it could be done! well done!! can't wait to see it finished off!

Some questions if you don't mind??

1.Is the pipe size the same.

2.What did you use for an adapter if at all??

3.Where did you get it and how much?

4.How's it sound?

Keep us posted on your progress:thumbup:

oldfast007 said:

I knew it could be done! well done!! can't wait to see it finished off!

Some questions if you don't mind??

1.Is the pipe size the same.

2.What did you use for an adapter if at all??

3.Where did you get it and how much?

4.How's it sound?

Keep us posted on your progress:thumbup:

Click to expand...

1.No,muffler pipe for a 1000 is huge.

2.I used the old pipe off the FZ and fit it inside the new from the CBR,made relief cuts and hammered them down around the smaller pipe.Weld.

3. Ebay 29 bucks 15 more for shipping

4.Nice throaty sound not too loud

Love the pipes... and rearend :thumbup:

sick bike dude, nice work on all the custom parts.

This, folks, is the true meaning of "custom."

Nice looking too.

Looks sick! I'd love to hear a sound clip :thumbup:

Nice work. Looks like an OEM tail.

very nice work!!! i am impressed!!!

xj750_Pete said:

Nice work. Looks like an OEM tail.

Click to expand...

It was.A piece of acrylic fishtank and a kitchen light diffuser later, you have a LED taillight/brake/turn signal.Add a piece of tubing on top and bondo and you get a ridge

How did you make the cowl as well? that looks very good and clean, I don;t really like how complex the yamaha and TCP cowls are.

Avalon786 said:

Looks sick! I'd love to hear a sound clip :thumbup:

Click to expand...

It's not very loud.more than OEM but nothing crazy.

reiobard said:

How did you make the cowl as well? that looks very good and clean, I don;t really like how complex the yamaha and TCP cowls are.

Click to expand...

I started with a piece of black 1/4 inch plastic,stuck it in the oven till soft and molded it till I got what I wanted shape wise.Then bondo till I was happy with it,It is all pretty rough lookin right now, once I get everything finished I will redo the sanding and such.

The frame and swing will be Flat black,gloss black body pieces and tank,texture flatblack engine

Looks GREAT! I really appreciate the time and effort you put into the project. I really like how clean the whole rearend is. I've always felt that the FZ6 is visually too busy.

*Eric Cartman voice*

-sweeeeeet...

Cool man. I like it too.