R6 Fork upgrade - brake lines?

Nolift911

Junior Member
Joined
Jul 22, 2009
Messages
94
Reaction score
1
Points
0
Location
the burg
Visit site
Getting ready to install some R6 forks/brakes (09) on my 05 FZ and wanted to know what I need in terms of brake lines? Will my old ones work ok?

Thanks
 

FinalImpact

2 Da Street, Knobs R Gone
Site Supporter
Joined
Mar 16, 2011
Messages
11,137
Reaction score
184
Points
63
Location
USA, OR
Visit site
09 R6S to 06 FZ6, do you have the 09 calipers? The two do not interchange. The 09 is fixed 4 piston pot. The 06 is a floating caliper. I'm not sure about the angle and position of the two as far as the banjo bolt connecting the line to the caliper.

I do know my 08 is a direct fit as the calipers are the same on the 08 FZ6 and the 09 R6S. I am assuming its an "S" you got the forks from?? Like these, conventional, not inverted: 2009 YZFR6S (BLACK METALLIC X) (CA ED.) - YZFR6SYCB Yamaha Motorcycle FRONT FORK Diagram and Parts


06 Brake Hose: 5VX-25872-00-00 HOSE, BRAKE
2005 FZ6 - FZ6STC Yamaha Motorcycle FRONT MASTER CYLINDER Diagram and Parts


08 Brake hose
4S8-25872-00-00 HOSE, BRAKE 1
4S8-25873-00-00 HOSE, BRAKE 2
2008 FZ6 (BLACK METALLIC X) - FZS6XB Yamaha Motorcycle FRONT MASTER CYLINDER Diagram and Parts

Conclusion if its an S, fork and caliper from an 09, I think you need different hose and banjo bolt on at least one side. You'll have to dig in further.
 

Nolift911

Junior Member
Joined
Jul 22, 2009
Messages
94
Reaction score
1
Points
0
Location
the burg
Visit site
Thanks for the replies here are the specifics on what I have for the conversion:

-2009 R6S Front Forks
-2007 FZ6 Brake Calipers

All going on an 05 model...

Am I ok if I use my old lines?

If I wanted to upgrade to stainless lines - do I get FZ6 lines or R6 lines?

I have all of the spacers etc as well which I hope work with my wheels (Marchesini for an R6)
 

SweaterDude

Broke-zillionaire
Joined
Apr 20, 2011
Messages
1,051
Reaction score
8
Points
0
Location
Nashville, TN ([email protected])
Visit site
Thanks for the replies here are the specifics on what I have for the conversion:

-2009 R6S Front Forks
-2007 FZ6 Brake Calipers

All going on an 05 model...

Am I ok if I use my old lines?

If I wanted to upgrade to stainless lines - do I get FZ6 lines or R6 lines?

I have all of the spacers etc as well which I hope work with my wheels (Marchesini for an R6)

If you go with SS lines, get the dual lines (as opposed to the "h" style) for the FZ as they are probably longer and will give more flexibility with routing and such.
 
Top