Would anyone know where to buy them? The .250 width connector can be hacked to fit,
but I'd like to find the proper size. My best guess-timate thinks that it is .320
but I'd like to find the proper size. My best guess-timate thinks that it is .320
Flag connectors for headlight - .32 ??
- Thread starter FrozenBiker
- Start date
DavesFZ
Junior Member
- Joined
- Apr 21, 2011
- Messages
- 393
- Reaction score
- 5
- Points
- 0
- Location
- Southeastern Michigan
I would check the bd43 headlight mod thread for that info. He might say where to source the .320 flags there, as they are part of his harness.
Thanks, I just checked but do not see a source. Might be best to send a PM..
I used a .250 for the headlight mod two years ago, but intended to look for the
right ones afterwards.. Time flys
I used a .250 for the headlight mod two years ago, but intended to look for the
right ones afterwards.. Time flys
phranK2k11
Chat Camper :)
FWIW I bought a H4 plug from a local parts store (Advance or Autozone) and opened it up and took one of the terminals out and swapped it into the FZ's plug. It may have been a little more expensive than just buying 1 connector, but not still under $5.
Great idea; will check tomorrow. I did find a place that has .305 terminals for a few cents each, but has minimum $20 order :Flip:
- Joined
- May 8, 2008
- Messages
- 14,991
- Reaction score
- 1,157
- Points
- 113
- Location
- San Diego, Ca.
Similar threads
