Webs
Junior Member
After doing some trial and error testing and internet/forum lurking I've not been able to find a solution, so here goes my inquiry.
I bought Vishnu's VS01 kit and installed it successfully over the winter season, minus one little hiccup.
My hi-beam indicator stays on at all times (when the bike is running).
The headlights properly switch between hi and lo beam, but the hi beam indicator light only dims slightly when switched off (instead of completely off).
I have replaced my flasher relay to fix the quick blink rate, and during that process somehow blew a tail fuse, and now after replacing that everything seems to work fine except for that indicator light.
I haven't had the chance to ride in the dark yet to see if the brightness of the headlight is actually good, but they seem somewhat dim to me.
Any ideas, or if this is even something to worry about? Could it be a bad ground? Any input appreciated! Will upload pictures when I can.:rockon:
TL;DR - Hi beam indicator always on regardless of lo/hi setting, what do?
I bought Vishnu's VS01 kit and installed it successfully over the winter season, minus one little hiccup.
My hi-beam indicator stays on at all times (when the bike is running).
The headlights properly switch between hi and lo beam, but the hi beam indicator light only dims slightly when switched off (instead of completely off).
I have replaced my flasher relay to fix the quick blink rate, and during that process somehow blew a tail fuse, and now after replacing that everything seems to work fine except for that indicator light.
I haven't had the chance to ride in the dark yet to see if the brightness of the headlight is actually good, but they seem somewhat dim to me.
Any ideas, or if this is even something to worry about? Could it be a bad ground? Any input appreciated! Will upload pictures when I can.:rockon:
TL;DR - Hi beam indicator always on regardless of lo/hi setting, what do?