Mounting LED Signal Lights from the2wheel.com?

Ruggybuggy

Member
Joined
Apr 21, 2012
Messages
415
Reaction score
6
Points
0
Location
Northern Ontario, Canada
Visit site
You have to buy adapters for $2.00. My FE had them as an option.

http://www.600riders.com/forum/fz6-electrical/43909-what-the2wheels-dont-tell-you-led-stalks.html

PS - i have hard time reading/responding to your posts as the avatar makes my eyes bleed. . . :(

Sorry about the bleeding eyes. :D

I came up with a way to mount them. Basically used a modified plastic retainer from one of the old light and used part of the shaft and made a mount. Hard to describe but looks like it was came from the factory. I'll take a pic when I get a chance.

I do have a problem with the rear LED signals. I purchased them from the2wheels.com and have signal, brake, and marker all in one. Something strange is that I can't get the marker lights on the turn signals to work when all the wires are hooked up. If I disconnect the stop wire the marker lights come on.

The wires on the LED's have five wires total. I did connect the green and black wires together because I figured they were grounds. Is this correct? I didn't get any instructions on how to wire them.
 
Top