HarmfuL
Junior Member
So i recently bought some Yamaha LED Indicators for my bike and started off by installing the rear set first (being bit more tricky I thought). The blinkers come with a resistor so the flasher relay didnt need to be replaced. I tested them and they worked fine on the rear, then installed front set and tested all together and now the indicators dont work, hazards, front light and rear! So I checked the fuses to see if I had blown any and they were all fine, went over my wiring again and they were all fine aswell?
Any suggestions or advice would be brilliant
Cheers
Any suggestions or advice would be brilliant
Cheers