PCIII vs Cobra FI2000R

I have a 2007 and a Scorpion exhaust and want to add the cat elim pipe and a fuel processor. Which one do you guys think would be better...PCIII or FI2000R?

power commander but i think you need the PC 5 not III , you can check their site to see the maps they should have one to suit the scorpion

I only see PCIII on their site.

I think PCV will only work on 2009+
For all other years - PCIII

And for Fi2000 - are you sure it will fit FZ6? Last time I checked they did not have anything for FZ6

mongol777 said:

I think PCV will only work on 2009+
For all other years - PCIII

Click to expand...

They've changed that now but the site is not updated. You can use the PCV now on all years FZ6...

Motogiro said:

They've changed that now but the site is not updated. You can use the PCV now on all years FZ6...

Click to expand...

When you say all years, you mean all years? Even without modification?

just confirming

KingY said:

When you say all years, you mean all years? Even without modification?

just confirming

Click to expand...

I called Dynojet for one of our members in Oz and you can call them and confirm. Their website is not updated. The bike we were in question about about was an 06 so that's S1 FZ6 and the PCV will work.

For me the whole concept of the aftermarket fuel management is being able to tune the bike. You may get a close map but are you sure your bike has proper air to fuel ratio?

I had my FZ6 dyno'd and I can attest there is a difference.
I would go with PClll or PCV...

So what is the difference between III and V?

Power commander V is much more easier to work with and if you combine it with the autotune future you will be saved from a lot time wasting.

PcIII and Scorpion pipes. It's my set up and it works brilliantly :rockon:


Sent from my iPad using Tapatalk