black-on-black
Junior Member
i'm new into the biking world and i just bought an o8 fz6. the clutch seems to be very sensitive(it only has a tiny bit of room to play with. just me or id this every where
Welcome to tha Yamaha FZ6 clutch! As Def said, you will get used to it.
Over the years I've added the longer slave lever and PAZO levers and found that combo to have smoothed things out a bit.
It also took me a few days to get used to it, now I dont noyice it at all.i'm new into the biking world and i just bought an o8 fz6. the clutch seems to be very sensitive(it only has a tiny bit of room to play with. just me or id this every where
I'm a bit confused...
...I didn't think this was a problem at all...it makes it so much easier to do fast gear changes when you get used to it.
If your handy with a welder the clutch arm can be cut and extended about 5/8"..This reduces the amount of "pull" and increases the engagement area...works good
One of the bad things about short levers is that they have less leverage. So they do make it a little harder feeling. There was a guy here that made longer slaver arms that would increase leverage and increasing the perceived friction zone.
Of course a sticky clutch cable may also add to the hard pull of the clutch.