- Joined
- Feb 7, 2009
- Messages
- 12,540
- Reaction score
- 1,188
- Points
- 113
- Location
- Cape Coral, Florida, USA
Yepper, I think we're on two different pages,
Those pic's are of the radiator protector, NOT the above muffler tape/gaurd. Pic is shot shooting up, from the floor. The ruler pic is should someone want to copy the fan / radiator gaurd (for reference). (Just a FYI)
Under the rear "fender" has a nice coating of road road debris
as does the inside of the mufflers (any part not really showing).
I don't wash the underneath of the mufflers (unless I rode thru a mud hole, etc)
Just to be clear, the aluminum foil/ tape is ABOVE THE MUFFLER. It's not covering the muffler, just keeping road crap
from getting up there and specifically trying to keep the seat release mechanism clean.
If you have the stock muffler still on the bike, its likely NOT even an issue as the stock muffler will block road crap from getting up there...
4-29-14,
Some pic's:
You can easily see the seat latch mechanism protected from any road debris. And yes, the underneath of the mufflers are filthy, unless its muddy, it just gets hosed when bathed...
Double click to enlarge the picture.
Last edited: