The fz6 life
Junior Member
OK, so I am new here first off, and before I made a membership I decided to search around here to see if I could find my issue, I could not. Either it is an uncommon issue, my issue, or I missed it in the forum. With that being said, my issue is as follows.
My clock on my cluster always goes forward/back to 1:00. I set the clock with the bike on, 15 minutes later after I shut it off, I turn the bike back on and it's 1:00 again. I set the clock with just the cluster on, but the bike off and sure enough, after 15 minutes the clock reverts again!
Setting: hold both the "reset" and "select" buttons for 2 seconds or so until the "hour" time is blinking, press "reset" until the desired hour is reached.
Press " select" until "minutes" are blinking, set desired time then press " reset" again until no numbers on the cluster are blinking. And the clock is set.
Except after 15 minutes of being off, then turning back on it reverts to 1:00!! I have no idea what is going in but it's quite the nuisance!
I would appreciate any advice you can offer
My clock on my cluster always goes forward/back to 1:00. I set the clock with the bike on, 15 minutes later after I shut it off, I turn the bike back on and it's 1:00 again. I set the clock with just the cluster on, but the bike off and sure enough, after 15 minutes the clock reverts again!
Setting: hold both the "reset" and "select" buttons for 2 seconds or so until the "hour" time is blinking, press "reset" until the desired hour is reached.
Press " select" until "minutes" are blinking, set desired time then press " reset" again until no numbers on the cluster are blinking. And the clock is set.
Except after 15 minutes of being off, then turning back on it reverts to 1:00!! I have no idea what is going in but it's quite the nuisance!
I would appreciate any advice you can offer