valves

  1. FinalImpact

    1st unofficial post from L3FTY, after storage, injectors leaking?

    L3FTY Hi and welcome to the 4'uhm Mr L3fty. I am sharing this here vs a PM as I think others will benefit from your methods and perhaps the outcome of this process. That said I also find it unlikely 8 different injectors leak so we are on the same page. What I want to question is the...
  2. I

    List of Motorcycle that require the least amount of maintenance

    Hi guys could you help me figure out which bikes require the least amount of major maintencae, such as valve adjustsments? The Fz6 was my favorite bike I wanted but the fact that it required the valves to be check roughly every 25k miles definetly help me not look at Aprilia and Ducati. I was...
  3. M

    Bent valve or bad timing?

    Hey everyone, My cam chain slipped a tooth when I was changing out my cam tensioner :spank: Totally my fault, I'm so frustrated. My bike still has a stable idle, but now at about 100 rpm less than usual. It sounds a lot deeper and less smooth at idle and at all rpm ranges (it kind of sounds...
  4. M

    Vegas Mechanics

    Hi Guys, I apologize if there is another thread about this, I used the search and was unable to find anything. Returning rider from Vegas. I recently bought a 2008 fz6 and so far, I'm loving it. From what I've read on here and the videos I watched, it sounds like my CCT is slowly...
  5. R

    RainCity Spring Cleaning Build

    Alright guys, it's finally time I start contributing some content around here. Here is a long overdue introduction of my bike. It looks a little rough around the edges after being knocked over by a lady leaving a parking spot. Definitely in need of some TLC. I've been looking forward to doing...
  6. E

    Valve check results

    Hey all, Doing my winter maintenance in my shop this weekend. I spent the morning pulling all the jazz off the top of the motor to do the valve check. I did not pull the tank, actually just suspended it from a few eyelet hooks I have in my ceiling by a few ratchet straps. In pulling...
  7. cvalliere

    What type of maintenance work do I need?

    I've had my 06 FZ6 for a year and a half now and have put a considerable amount of miles on it. It is my first bike and I bought it with 18k and now it probably has around 28k. The only maintenance I have done to it are: Regular Oil Changes Clutch Cable Lube Chain and Sprocket Replacement...
  8. N

    Valve clearance check

    THIS IS A CHECK GUIDE, NO ADJUSTMENT WILL BE DONE Yamaha recommends doing valve check and adjustment if needed every 40 000 km, or 24 000 miles. Mine has nearly 29k miles, I can tell valve clearances were not yet checked on it. Our bikes have inline, liquid cooled, 4 cylinder engines with 4...
Top