rod

New clutch - Not enough spring-action... SOLVED! Installed a new clutch (a set with compression springs, friction plates and clutch plates). The whole operation was quite easy except refitting the clutch cover onto the pull rod. I followed the steps of the "2004 Service Manual" (around page...

So I havent been around much as of late On top of life sucking, a lot, my beautiful FZ6 was taken away from me. A rather old woman turned across traffic into me and I bounced off the side of her little suv at 50. I felt it as soon as I tried to stand up. A plate, a rod, and 6 screws...

Hi guys, today I am changing the seals, wipers, and oil on my R6 forks. I have completely dissasembled them apart from the seals themselves and the dampening assembly and bolt. ( I have removed the dampening rod) When I try to unscrew the bolt on the bottom of the forks for the assembly it...

Hi guys, I am hearing a knocking sound from the left side of the engine. The sound can be heard after revving the engine and the rPMs start to decrease/ go down after 4000 to idle. When i'm revving the bike and the rPMs go up, I can't hear the sound. You can hear what I hear in this video...

Looking for the shift rod for an 06.

Hello. Yesterday I braked into pieces my fazer's cct and fix it today. I were fixed a 2010 kawasaki zx6r cct a while ago, it's a simple rod (with stoper) and a spring. Because of sping aging, cct wasn't extending enough and it was weak. So I made a spacer for it. Spring got some preload with...