cct

Hello everyone, First of all, a big thank you to all the participants of this forum for the vast amount of information available here. And now, here is my story, I am working on a 2006 Yamaha FZ6 that has been sitting for around two years (not entirely sure, but a long time), it had a few...

Hi all. Planning to replace my cam chain tensioner as I suspect a faint ticking noise from right side and warm engine is caused by a worn cct. Not that expensive, seems to be a common issue and almost to be considered periodic maintenance. But, reading up on the task, many seem to point out...

Hey guys, just wondering who has swapped out for an APE cct and double checking model #. APE doesn't list the FZ6 on their model list, but the 99-05 R6 uses their YT1000 model, so I'm guessing that's the correct one? Since I have access to a shop this month and have another week or two down...

Hi Guys, I apologize if there is another thread about this, I used the search and was unable to find anything. Returning rider from Vegas. I recently bought a 2008 fz6 and so far, I'm loving it. From what I've read on here and the videos I watched, it sounds like my CCT is slowly...

Hello. Yesterday I braked into pieces my fazer's cct and fix it today. I were fixed a 2010 kawasaki zx6r cct a while ago, it's a simple rod (with stoper) and a spring. Because of sping aging, cct wasn't extending enough and it was weak. So I made a spacer for it. Spring got some preload with...

I have a quiet but noticeable "Yamatick" that happens consistently around 3800 and 4200-4500 RPMs. The bike is an 08 with about 7k miles. Everything I've read points to it being the CCT. I wanted to start a thread to clarify a couple things. First, is it possible to remove and oil the CCT (or...