Recent content by Mattsfz6

Thank you for the reply. I will give this a try and report back.

They are powered thru the high beam wire. So when I flip on the high beam, the two lights (should) come on in MODE1. Turn off the high beam and turn it back on, you are in MODE2. Do it again, MODE3. Problem is the first time i get on the bike and turn it on, one light starts on MODE 1 and...

Motogiro, you guessed it. There was an open path in the system. After i fixed that the problem got fixed... for a while. Now about 50% of the time, when I start the bike the lights have matching modes, the other half they start unmatching. I am so confused.. They are connected to the same...

it was a short :cheer:

I got 2 fog lights with angel eye halos from amazon. Unit comes with one three mode main beam and an angel eye halo around it. I connected the halo wires to the low beam on the wiring harness (works fine) when I connected the main light wires to high beam.....the lights didnt run...

please pm if you have a set

please pm me if you have one to sell

Doesn't have to be the quietest one. Please reply and PM if you want to sell me your baffles or if you have the equipment to make some from scratch.

edited, resolved

Resolved!!!!!! It was the kill switch. Shorted the wire and no more stalls for this guy. Blah Thank you.

Owner of 06 here with 75k on the clock. Started experiencing random stalls. Happens at idle, and sometimes going 75 on the freeway. Often it takes few tries to start the bike. Bike loses power pulling away from a light, almost to the point of stalling but then gets it back suddenly. Error...

Thank you for the responses, I'm gonna try what you said and see if the problem persists. :thumbup:

here is a video of it, seems like #3 also has some crap in it IMG 0317 - YouTube

My bike started running really poorly and i smell something burned. Pulled over to see the #4 spark plug cap about half way out of its hole. I clicked it back in and everything went back to normal but it keeps popping off. I saw another thread with the same problem where tightening the plug...