Recent content by Auto

  1. A

    04 FZ6 No Crank

    @Motogiro Will do, by any chance do you know where on the bike the lean angle sensor is. Also, thank you for all of the help me and my buddy really appreciate it
  2. A

    04 FZ6 No Crank

    @Motogiro We attempted jumping the fuel pump and starter all while holding in the clutch and in neutral, but still no dice. I’m back to thinking it could be a bad ignition, because we have fuel and crank but no spark, and we can’t find any breaks in wiring or bad connections. Also the kill...
  3. A

    04 FZ6 No Crank

    The guy we bought it off of was a little sketchy but the vin was clean and everything checked out. The ignition has a straight cut key(not sure if it is anftermarket) and the speedometer, neutral light, and all of the gauges were deleted.
  4. A

    04 FZ6 No Crank

    Just grounded that blue and white wire, the motor cranked but no start still. @Motogiro
  5. A

    04 FZ6 No Crank

    Kill switch has continuity but the starter button does not. We have tried starting the bike with the clutch pulled all the way, in neutral, and with the kickstand up at the same time. But no luck.
  6. A

    04 FZ6 No Crank

    Just finished replacing the starter relay and no luck. Going to attempt to follow wires back from starter button and look from there. We also opened the starter switch and found no bad connections either. Still thinking it could possibly be a bad ignition.
  7. A

    04 FZ6 No Crank

    @TownsendsFJR1300 That is my mistake we bridged the gap on the starter relay that is near the battery and underneath the gas tank. That is how we were able to get it to turn over. The fuses that were blown were the efi, ignition, and head. @Gary in NJ That's what we had been searching for but...
  8. A

    04 FZ6 No Crank

    Trying to help my buddy out with his 2004 Yamaha FZ-6. The bike stalled out on him twice and then he got no crank, starter click, or fuel pump however the bike was still recieving power as running lights and brake lights still function. After relpacing fuses Fuel Pump is functional but still no...
Top